This is the Reedy NEO ONE High-Performance Sensor-Brushless Motors.

Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but...  there has to be a better way. Now there is Field Link!

Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. Can't get any easier!

But wait! Act now and we'll throw in Castle Link USB compatibility too! That's right, these cards are also Castle Links that give you access to the entire world of Castle tuning functionality.

Does it work without a computer or not?
Yes, mostly. The card is programmed to work with the latest controllers and software when it leaves the Castle workshop. It will work with all Castle Link compatible controllers running software released since 2007. Go to www.castlecreations.com for more details. There is always a chance that we will upgrade the controller firmware down the road and that upgrade may require that the Field Link be upgraded too. That is easily accomplished, but it will require a computer running the latest version of Castle Link that is always available for free on the Castle website. We’ll also be happy to upgrade it for you if you drop it in the mail to us.

You see, there are actually two Field Link cards, as no car guy wants to set heli governor gain, and no glider guy cares about forward reverse lockout. So select the card you need below.

Available exclusively at RC-Monster, this heatsink was designed with the brushless user in mind. It wraps perfectly around the motor can for the most effective heat dissipation, and also functions as a clamp to keep Feigao, Hacker and similar pressed endbell type motors intact. "S", "L", and "XL" sizes available for 50mm, 60mm, and 74mm motors. This heatsink will fit any 540 size motor (36mm diameter can), brushed or brushless, and is a great heatsink that will not fall off your motor (rear clamp not necessary for all motors).

"S" fits 50mm can length

"L" fits 60mm can length

"XL" fits 74mm can length

Our Battery Eliminator Circuits are small devices that eliminate the need for a receiver and servo battery pack. They draw higher voltage from the motor batteries and drop it to a voltage level that is suitable for your receiver and servos. This is required in applications which draw high power for multiple servos or use more than 3S motor packs, as most ESCs with linear BECs are not designed for these applications.

NOTE: CC BEC Pro should never be operated in series or parallel with another BEC or backup receiver pack connected to the RX/Servo side of the circuit.

Pushing your Mamba Monster to the max? Just the type who likes the motor as cool as possible? No matter which category you fall under, Castle has the solution! The new CC Blower plugs directly into your receiver for power, and can drop motor temperatures as much as 30 degrees!* A must have for any hardcore basher or temperature freak. Includes, fan, shroud, and two (2) black zip ties. Fits on motors with outside diameters between 1 1/2" and 1 7/8". Get yours today! Your Mamba Monster will love you for it!

+/- 4mm thick 6061 aluminum cnc front motor cover. Includes 4 screws to mount to motor front endbell.

Provides stronger mount/deeper screw depth for Lehner motors, and virtually eliminates winding damage caused by long screws. Also popular for a front motor cover for the Neu motors.

If you want something done right, you usually have to do it yourself. We were never totally satisfied with the options for bullet connectors for our high power applications, so we designed and manufactured our own. CC Bullets make the connection, every time. Simple as that.

Specs
Part #	CCBUL4X3 CCBUL5.5X3 CCBUL6.5X3
Retail Price	4.0mm: $3.99 5.5mm: $5.49 6.5mm: $6.99
Wire Gauge	4.0mm: 16-13ga 5.5mm: 13-10ga 6.5mm: 13-8ga
Max Amps	4.0mm: 75 amps 5.5mm: 150 amps 6.5mm: 200 amps

These are the needed Gold plugs for plugging in the Lehner motors. "1" item includes 3 male and 3 female plugs.