cooling fan question

[mmdooley]

HI all, I got a fan for my esc and I am wondering how to wire it. Should it be wired to the batteries or on the out side of the UBEC??
Thanks

[MetalMan]

How many volts is it rated for?

[coolhandcountry]

If it is low voltage one you can plug into the thrid channel on receiver.

[mmdooley]

it is 9 volt or lower.

[HotnCold]

How many batteries are you running - you could run plugged into receiver - and try it - or "turbo charge" and plug into batt connections...

[Sylvester]

With my fan (12V fan) i used the red and black wire and put it in the aux. (3rd channel) and plugged it in and it worked.

[mmdooley]

That sound good Cool hand I will try it in the 3rd plug in. I am running 14 cells Hotncold. I hooked it to my batteries and it worked but I was afraid it might overload. Thanks for the help guys. Here's some bent parts from testing. This thing is a rocket I can't wait for LiPo's! What would be a good LiPo setup for a10lb. e-maxx with a 8XL and a 9920??