My Xb8 Brushless, video on track - RC-Monster Forums

looping · **My Xb8 Brushless, video on track -** 04.04.2007, 03:19 PM

Hello!! IM french and i dont speak english very well... but i want to show you my
buggy :027:

Setup : 9xl + quark monster pro

Lipo's 8000 Mah , 4S

Thanks Rc monster and His forum for the setup
councils!

Video: -Bad quality: http://www.dailymotion.com/featured:...lectrique-lipo

-good quality:
http://looping30000.free.fr/modelisme/Xb8Lipo.wmv

Serum · 04.04.2007, 03:26 PM

Hi! welcome to this forum!

Downloading the vid as we speak..

Thanks for sharing!

AAngel · 04.04.2007, 03:52 PM

I really didn't want to watch that video, but I couldn't help myself. I love the XB8, and the video only makes me want one even more. Unfortunately, my local hobby shop doesn't stock parts for the X-Ray, so I just stick with my Sportwerks.

Isn't it amazing the way an XB8 just looks like it's floating on air and riding on rails all at the same time.

Sylvester · 04.04.2007, 03:56 PM

Nice buggy! Downloading vid right now..

looping · 04.04.2007, 06:12 PM

Thanks for your answers!

I have a probleme with my setup, the motor over heat and the controller cut after 5 min of run.

My motor Feigao 540c 9L it's a 3345kv and in 14,4V the rpm goes up 50000tr/min

Does the controller have a adjustment to limit the rpm?? what i have to do for decrease the temperature??

I use a 13t pinions and a 46 T spur.

Thanks and sorry for my bad language:005:

Dafni · 04.04.2007, 06:14 PM

Get yourself a Wanderer 7XL or a 8XL and you should be fine.

jnev · 04.04.2007, 06:28 PM

Very nice buggy. I am also downloading the video right now.:027:

Mike.L · 04.04.2007, 06:32 PM

A heatsink for the quark controller. Its downloading now!

looping · 04.04.2007, 07:04 PM

Quote:

A heatsink for the quark controller. Its downloading now!

yes i want to made it but it's not a problem that the motor turned at 50000 tr/Min?? :032:

AAngel · 04.04.2007, 07:17 PM

I think that the 9L is closer to a 2500kv motor. I would suspect that your controller needs a heatsink, as has already been mentioned.

As for the gearing, I'm running an 8L in my buggy right now with 10/46 gearing and haven't had any problems with heat.

looping · 04.04.2007, 07:40 PM

Quote:

I think that the 9L is closer to a 2500kv motor

Yes i have see that on feiago website but in my motor (buy here) its indicate " 3445 Kv" strange no?

gixxer · 04.04.2007, 08:13 PM

nice looking buggy. downloading the video now :)

GorillaMaxx360 · 04.04.2007, 08:17 PM

nice very fast

jnev · 04.04.2007, 11:22 PM

Video is great. Seems to be plenty fast for the track.:027:

zeropointbug · 04.04.2007, 11:40 PM

Nice buggy indeed! It seems very smooth with the Quark in there. Although, the jittery trigger finger... :005:

Anywho, NICE driving through the track.