G3 Maxx Race Suspension Kit (GMX05-RS-AL) Includes: 4 upper arms, 4 lower arms, 2 shock towers, titanium hinge pins, 8 shock levers, shock stand-offs, tower spacers, fasteners, and decals Features - CNC machined 6061 T6 aluminum in a natural finish Low angle shock design with * leverage force tuning Low-profile shock towers with lowered body mounts Wheelbase adjustable arms (± 1/2" or Equal) LunsfordTM titanium hinge pins Ultra-light weight - Same as stock! Hardware for single or dual shocks Increase ride height options Set-screws at pivot balls Adjustable caster, and more... Direct fit with 2.5 E/T-Maxx * Leverage force tuning - The lower arms are designed with 'L' shaped levers for mounting the bottom ends of the shocks. These levers can be moved along the arm to control the resistance force of the shock. Moving then further from the hinge point will increase resistance, while moving closer will decrease resistance. For example: Firmly hold out one arm straight ahead of you. Push down on this arm with your opposite hand at a point above your elbow. It should be difficult to force down. Now, do the same but push down near your wrist (much easier). With force tuning, small shocks can act like "big" shocks with less weight and less cost.

G3 Race Chassis - CF (GMX07-CH-CF)
Includes: 3mm carbon chassis plates, front and rear skid plates, aluminum braces, black velcro battery straps, foam cell pads, center drive shafts, armor plated fasteners, instructions and decals. Suggested Retail: $345.00

Product Features:

-  Direct Fit with Stock E-Maxx Parts

-  Updated parts also fit with our G2 version

-  Natural finish 6061 T6 aluminum braces

-  3mm ultra-light black carbon fiber plates

-  Over 3 oz. lighter than aluminum kit

-  Lowered battery tray holds 8 cells per side

-  Low center of gravity design

-  Integral 1/8” aluminum skid plates

-  Mounting holes for Novak EVX and HV

-  1” extended wheelbase similar to a REVO

-  Heavy duty Velcro battery straps

-  Cross straps for lipo or stick pack batteries

-  Custom length hardened steel center shafts

-  Armor plated hexscrews.

 

 Assembly Diagram / Instructions

 

G3 Race Chassis (GMX07-CH-AL)
Includes: 1/8" aluminum chassis plates, front and rear skid plates, aluminum braces, black velcro battery straps, foam cell pads, center drive shafts, armor plated fasteners, instructions and decals.

Product Features:

-  Direct Fit with Stock E-Maxx Parts

-  Updated parts also fit with our G2 version

-  Natural finish 6061 T6 billet aluminum

-  1/8" thick plates for improved durability

-  Lowered battery tray holds 8 cells per side

-  Low center of gravity design

-  Integral 1/8” aluminum skid plates

-  Mounting holes for Novak EVX and HV

-  1” extended wheelbase similar to a REVO

-  Heavy duty Velcro battery straps

-  Cross straps for lipo or stick pack batteries

-  Custom length hardened steel center shafts

-  Armor plated hexscrews.

 

Features - CNC machined from 1" thick 6061 T6 billet aluminum. Fits your stock E-Maxx truck and our X-Brace chassis. Uses a unique coupler design to constantly engage your second gear set while eliminating 50 grams of excess weight in your transmission. This will also eliminate the need for a shifting servo for even more weight reduction! You'll love the silky smooth gear mess and have a much easier time doing maintaince. Note: This kit uses stock E-Maxx gears, bearings, and shafts (not included). It also requires modification of your input-shaft. The front end of the shaft will need to be cut using a metal hand saw or Dremel tool. Refer to our assembly diagram for more information.

RC-Monster Steel Center Dogbone Kit for the Extended G-Maxx Chassis

Includes: 1/8" thick aluminum mount plate, armor plated fasteners, and decals.

G3-XL Battery Straps - Blue