Team Associated is proud to bring to you the Factory Team RC8T, a 1:8th scale full-blown racing truggy based on the successful RC8 platform! Like the Factory Team RC8 buggy before it, the highly anticipated RC8T will raise the performance bar for 1:8th nitro truggies. 

Strength, durability, maximum corner speeds and rough track handling were the key design elements Area 51 worked into the RC8T. Drivers will experience unparalleled and effortless “pop” as they launch from the jumps. Landings will be plush beyond belief due to the enhanced suspension that other truggies can only dream of.

From the correctly balanced and optimized weight distribution, silky smooth and reliable ‘Big Bore’ shocks featuring 4mm gold shafts, innovative clutch design, to the machined chassis, every inch of the RC8T screams high performance and durability. There will be no question to why the Factory Team RC8T will be the truggy of choice at the highest levels of competition.
The Factory Team RC8T Truggy Kit features:
 

• Factory assembled shocks, diffs and turnbuckles. Factory Team shock and diff fluids included.
• Factory Team ‘Big Bore’ threaded, hard-coated shocks feature 16mm six hole pistons and 4mm gold shock shafts for maximum smoothness
• Factory Team Aluminum Top Plate and Steering Rack for the ultimate truggy durability
• Factory Team chassis braces with integrated center stiffener that maintains chassis integrity
• 4mm woven carbon fiber shock towers for maximum rigidity, strength, and light weight to keep the center of gravity low
• Blue aluminum wheel hexes featuring captured drive pins and nyloc wheel nuts providing the ultimate in security
• The 4.30:1 ratio gear boxes produce maximum punch allowing the RC8T to accelerate harder out of the corners and up the biggest jumps
• FFC Free Float Caliper brake-system eliminates the possibility of unwanted brake drag while on throttle
• Two-piece split-center diff mount allows quick and easy access to the center diff
• Wing angle and position is fully adjustable and secure
• High-torque capacity three-shoe aluminum clutch
• Full CVAs with captured CVA pins
• Full ball bearing drivetrain and steering
• Metric alloy hardware throughout
• Milled 3mm black hard-coated 7075 aluminum chassis
• Factory Team blue titanium turnbuckles

Latest Firmware installed! Future updates via computer download.

New "traditional" style construction with dual heatsinks!

Perhaps the ultimate "big truck" brushless controller! Dual Heatsinks, direct soldered battery and motor leads, 150000 rpm capability( with 2 pole motors), a 120 amp capability with up to 32 cells or 10s LIPO packs!Programmable Lipo voltage cutoff, small size. This is among the best controllers available for  high voltage brushless applications! ***hydro version***

High amp, High voltage controller for cars/boats. Huge 250 amp continuous capability. Handles up to 8s Lipo. Opto-coupled controller requires receiver pack or external BEC(do not remove the red rx wire on this controller). Latest firmware installed. Future firmware updates possible via PC with the CC03 cable. PC programable with the MGM USBCom(not included). Z series controller is compatible with the MGM Black Box data recorder.

***hydro version*** for water resistance

Technical data
Controller for motors	brushless
Reversible controller
Number of Li-Ion, Li-Pol feeding cells	3 - 8
Number of NiCd, NiMh feeding cells	9 - 24
Number of A123 feeding cells	4 - 9
Compatible with any feeding cells
Operating voltage	9 - 35.0 V
Max. continuous current (for full throttle)	250 A
Max. peak current (peak 5 sec.)	300 A
Version BEC / Switching BEC / OPTO	OPTO
BEC voltage	- V
Max. BEC current at 25 °C	- A
BEC short circuit protection
Number of regulation steps	1024
PWM frequency	8/16/32 kHz
On-state switch (FETs) resistance at 25 °C	2 × 0.28 m
Dimensions	50×31×22 mm	1.97×1.22×0.87 in
Dimensions with external capacitor	80×31×22 mm	3.15×1.22×0.87 in
Weight without power conductors	81 g	2.604 oz
Weight incl. all conductors	119 g	3.826 oz
Power conductors cross-section to batt. / to mot.	6/4 mm2	0.0093 in2
Length of the power conductors	110 mm	4.331 in
Servocable cross-section	0.25 mm2	0.0004 in2
Length of the servocable	190 mm	7.480 in

Once again, Traxxas® has broken new ground with unprecedented innovation and performance. The New E-Revo® is the most advanced electric racing monster truck ever created. The 6-time National Champion REVO is already the pinnacle of engineering in the Nitro arena and now E-Revo breaks open an entire new category that embraces today’s electric technology. Built from the start to be electric, E-Revo harnesses all the advantages that electric power brings to the race. The integrated battery compartments position the weight of the batteries as low and as close to the centerline of the chassis as possible. A smooth center skid plate adds strength and beauty while it shields critical driveline components. The low center of gravity, balanced weight distribution, and incredible torsional rigidity yields the best handling Revo platform ever.
 

The proven 16.8 volt EVX-2 power system delivers massive torque through twin Titan 550 motors. Always looking ahead, Traxxas engineers made E-Revo truly brushless ready with a driveline that’s been proven tough for durability at the extreme with brutal 50+mph 6S LiPo power and custom brushless motors from the aftermarket. The unique battery compartments are easily scalable with built-in features to adapt for multiple battery configurations. A separate motor plate was engineered for a clean, low-slung single motor installation. Of course, E-Revo retains all the benefits of the exclusive linkage based suspension system including the most suspension travel possible, tunable progressive damping, independent ride height adjustment, and the absolute highest level of control for any situation. Hard-anodized Teflon coated shocks with TiN shafts, and dual digital waterproof steering servos have been added to further sharpen the handling. Off the racetrack, E-Revo is our most recent model to be equipped with exclusive fully water-sealed electronics. Only Traxxas makes it possible to run through water, mud, snow and other wet conditions. E-Revo is offered fully assembled and Ready-To-Race with the TQ radio system and EVX-2 electronic speed control.

Features
Amazing new chassis design with integrated dual battery compartments
Quick release battery doors
Battery cooling vents
Scalable battery compartments from sport packs to brutal 6S LiPo power
Smooth center skid plate shields the driveline
Weather-sealed electronics for running in water, mud, and snow.
EVX-2 16.8-volt FWD/REV Electronic Speed Control with patent pending Training Mode
Dual Titan® 550 motors
Dual digital waterproof steering servos deliver 125 oz-in of torque & 0.16-sec transit time
Hard-anodized Teflon®-coated shock bodies with TiN coated shock shafts
4-Channel micro receiver
Brushless-ready 2-speed transmission with metal center idler gear
Sealed pivot ball suspension
Sealed limited slip differentials
Dual-servo steering system
Hex hardware throughout
3.8” black chrome Gemini wheels
3.8” Talon tires
Sleek new pe-painted body design
Adjustable rear wing
Compatible with many Revo Platinum upgrades
Traxxas innovation built in!
Ready-To-Race®
 

 Latest Firmware installed! Future updates via computer download.

New "traditional" style construction with dual heatsinks!

Perhaps the ultimate "big truck" brushless controller! Dual Heatsinks, direct soldered battery and motor leads, 150000 rpm capability( with 2 pole motors), a 90amp capability with up to 32 cells or 10s LIPO packs!Programmable Lipo voltage cutoff, small size. This is among the best controllers available for  high voltage brushless applications! ***hydro version***

New Z series controller compatible with MGM Black Box. This replaces the 224/28 controller as the high current controller for up to 6s Lipo. Latest firmware installed - future firmware updates can be downloaded via PC with the CC03 cable. Add the MGM USBCom to allow parameter setting on your PC. Handles up to 6s Lipo and 280 amps continuous!

"Traditional" style construction with dual heatsinks. Built in switching BEC(programable BEC voltage output!) - no need for a rx pack or UBEC with these controllers! Programmable via USB, Unicard, or transmitter!

Perhaps the ultimate "big truck" brushless controller! Dual Heatsinks, direct solder battery and motor leads, 150000 rpm capability( with 2 pole motors), a HUGE 280amp capability with up to 18 cells or 6s LIPO packs. Programmable Lipo voltage cutoff, small size. This is among the best controllers available for high amp, high voltage brushless applications! ***hydro version*** treated for water resistance

Technical data
Controller for motors	brushless
Reversible controller
Number of Li-Ion, Li-Pol feeding cells	2 - 6
Number of NiCd, NiMh feeding cells	6 - 18
Number of A123 feeding cells	3 -7
Compatible with any feeding cells
Operating voltage	6 - 25.5 V
Max. continuous current (for full throttle)	280 A
Max. peak current (peak 5 sec.)	340 A
Version BEC / Switching BEC / OPTO	Switching BEC
BEC voltage	5 / 6 V
Max. BEC current at 25 °C	6 A
BEC short circuit protection
Number of regulation steps	1024
PWM frequency	8/16/32 kHz
On-state switch (FETs) resistance at 25 °C	2 × 0.18 m
Dimensions	50×31×21 mm	1.97×1.22×0.83 in
Dimensions with external capacitor	65×31×21 mm	2.56×1.22×0.83 in
Weight without power conductors	75 g	2.411 oz
Weight incl. all conductors	113 g	3.633 oz
Power conductors cross-section to batt. / to mot.	6/4 mm2	0.0093 in2
Length of the power conductors	110 mm	4.331 in
Servocable cross-section	0.25 mm2	0.0004 in2
Length of the servocable	190 mm	7.480 in

G3 Maxx Race Suspension Kit (GMX05-RS-AL) Includes: 4 upper arms, 4 lower arms, 2 shock towers, titanium hinge pins, 8 shock levers, shock stand-offs, tower spacers, fasteners, and decals Features - CNC machined 6061 T6 aluminum in a natural finish Low angle shock design with * leverage force tuning Low-profile shock towers with lowered body mounts Wheelbase adjustable arms (± 1/2" or Equal) LunsfordTM titanium hinge pins Ultra-light weight - Same as stock! Hardware for single or dual shocks Increase ride height options Set-screws at pivot balls Adjustable caster, and more... Direct fit with 2.5 E/T-Maxx * Leverage force tuning - The lower arms are designed with 'L' shaped levers for mounting the bottom ends of the shocks. These levers can be moved along the arm to control the resistance force of the shock. Moving then further from the hinge point will increase resistance, while moving closer will decrease resistance. For example: Firmly hold out one arm straight ahead of you. Push down on this arm with your opposite hand at a point above your elbow. It should be difficult to force down. Now, do the same but push down near your wrist (much easier). With force tuning, small shocks can act like "big" shocks with less weight and less cost.

New E series controller from MGM. This replaces the 224/28 controller as the high current controller for up to 6s Lipo. Latest firmware installed - future firmware updates can be downloaded via PC with the CC03 cable. Add the MGM USBCom to allow parameter setting on your PC. Handles up to 6s Lipo and 280 amps continuous!

"Traditional" style construction with dual heatsinks. Built in switching BEC(programable BEC voltage output!) - no need for a rx pack or UBEC with these controllers! Programmable via USB, Unicard, or transmitter!

Perhaps the ultimate "big truck" brushless controller! Dual Heatsinks, direct solder battery and motor leads, 150000 rpm capability( with 2 pole motors), a HUGE 280amp capability with up to 18 cells or 6s LIPO packs. Programmable Lipo voltage cutoff, small size. This is among the best controllers available for high amp, high voltage brushless applications! ***hydro version*** treated for water resistance

Technical data
Controller for motors	brushless
Reversible controller
Number of Li-Ion, Li-Pol feeding cells	2 - 6
Number of NiCd, NiMh feeding cells	6 - 18
Number of A123 feeding cells	3 -7
Compatible with any feeding cells
Operating voltage	6 - 25.5 V
Max. continuous current (for full throttle)	280 A
Max. peak current (peak 5 sec.)	340 A
Version BEC / Switching BEC / OPTO	Switching BEC
BEC voltage	5 / 6 V
Max. BEC current at 25 °C	6 A
BEC short circuit protection
Number of regulation steps	1024
PWM frequency	8/16/32 kHz
On-state switch (FETs) resistance at 25 °C	2 × 0.18 m
Dimensions	50×31×21 mm	1.97×1.22×0.83 in
Dimensions with external capacitor	65×31×21 mm	2.56×1.22×0.83 in
Weight without power conductors	75 g	2.411 oz
Weight incl. all conductors	113 g	3.633 oz
Power conductors cross-section to batt. / to mot.	6/4 mm2	0.0093 in2
Length of the power conductors	110 mm	4.331 in
Servocable cross-section	0.25 mm2	0.0004 in2
Length of the servocable	190 mm	7.480 in

1/8 Xcelorin Brushless Combo, 1300Kv
 

Key Features

• Powerful, 720-sized sesorless brushless four pole motor
• No motor maintenance required
• Precision motor ball bearings for smoother operation
• Sintered Neodymium rotor
• ESC features 160A continuous current with 800A peak
• Prewired Losi EC5 power connector
• Accommodates a 3-5-cell LiPo battery pack
• High-speed cooling fan for lower running temperatures and protection
• Optimized for Spektrum or legacy radio systems
• Internal and programmable BEC
• Adjustable low-voltage cutoff to protect your battery investment
• Forward/Brake with Reverse or Forward/Brake settings
• Forward and reverse throttle limiting available
• Four LEDs to indicate functions
• Three preset drive profiles: 3S, 4S and 5S
• Quick Programming Card allows adjustments to the ESC without the need for a computer
• Includes three pre-programmed profiles for convenience
• PC setup software CD included for complete configuration of profiles
• Software interface allows for unlimited profile settings and tuning
• Adjust brake and throttle curve settings with the simple-to-use graphical interface software

Overview

Xcelorin Brushless Systems from Losi represent the latest development in brushless power and performance. The 1/8-scale 1300Kv Xcelorin Sensorless Motor and Electronic Speed Control Combo will convert any 8IGHT-based race or RTR vehicle into an electric vehicle. Enjoy the brute torque and speed achieved through brushless technology with Losi’s 1/8-scale Xcelorin Sensorless Brushless Systems.

The Xcelorin Sensorless combo combines the performance features of the two components below to achieve the power and response needed for RC competitions.

1/8 Sensorless Motor- The powerful 720-sized Xcelorin Sensorless brushless motor offers performance designed features like a sintered neodymium rotor, precision motor ball bearings, and is virtually maintenance free.

1/8 Sensorless ESC - The feature packed Xcelorin Sensorless Electronic Speed Control features a high-speed cooling fan, pre-wired Losi EC5 power connector, accommodates a 3-5 cell LiPo battery pack, forward/brake with reverse or forward/brake settings, two preset drive profiles with unlimited potential with a PC and much more.
The ESC also includes a Quick Programming Card, which allows adjustments to the ESC without the need for a computer, and included three pre-programmed profiles for convenience.

1/8 Xcelorin Brushless Combo, 1700Kv
 

Key Features

• Powerful, 720-sized sensorless brushless four pole motor
• No motor maintenance required
• Precision motor ball bearings for smoother operation
• Sintered Neodymium rotor
• Longer run times
• 160A continuous current with 800A peak
• Prewired Losi EC5 power connector
• Accommodates a 3-5-cell LiPo battery pack
• High-speed cooling fan for lower running temperatures and protection
• Optimized for Spektrum or legacy radio systems
• Internal and programmable BEC
• Adjustable low-voltage cutoff to protect your battery investment
• Forward/Brake with Reverse or Forward/Brake settings
• Forward and reverse throttle limiting available
• Four LEDs to indicate functions
• Three preset drive profiles: 3S, 4S and 5S
• Quick Programming Card allows adjustments to the ESC without the need for a computer
• Includes three pre-programmed profiles for convenience
• PC setup software CD included for complete configuration of profiles
• Software interface allows for unlimited profile settings and tuning
• Adjust brake and throttle curve settings with the simple-to-use graphical interface software

Overview

Xcelorin Brushless Systems from Losi represent the latest development in brushless power and performance. The 1/8-scale 1700Kv Xcelorin Sensorless Motor and Electronic Speed Control Combo will convert any 8IGHT-based race or RTR vehicle into an electric vehicle. Enjoy the brute torque and speed achieved through brushless technology with Losi’s 1/8-scale Xcelorin Sensorless Brushless Systems.

The Xcelorin Sensorless combo combines the performance features of the two components below to achieve the power and response needed for RC competitions.

1/8 Sensorless Motor- The powerful 720-sized Xcelorin Sensorless brushless motor offers performance designed features like a sintered neodymium rotor, precision motor ball bearings, and is virtually maintenance free.

1/8 Sensorless ESC - The feature packed Xcelorin Sensorless Electronic Speed Control features a high-speed cooling fan, pre-wired Losi EC5 power connector, accommodates a 3-5 cell LiPo battery pack, forward/brake with reverse or forward/brake settings, two preset drive profiles with unlimited potential with a PC and much more.
The ESC also includes a Quick Programming Card, which allows adjustments to the ESC without the need for a computer, and included three pre-programmed profiles for convenience.

This is the beginning of many new parts for the Baja

Arms have been extended 1.00" per side 2.00" oal

Two parts not shown is a shock brace for the front shock tower and Upper Arm Ball Ends

 Latest Firmware installed! Future updates via computer download.

New "traditional" style construction with dual heatsinks!

Perhaps the ultimate "big truck" brushless controller! Dual Heatsinks, direct soldered battery and motor leads, 150000 rpm capability( with 2 pole motors), a HUGE 160 amp capability with up to 24 cells or 8s LIPO packs. Programmable Lipo voltage cutoff, small size. This is among the best controllers available for high amp, high voltage brushless applications!  ***hydro version***