This is the beginning of many new parts for the Baja

Arms have been extended 1.00" per side 2.00" oal

Two parts not shown is a shock brace for the front shock tower and Upper Arm Ball Ends

Product Features:

-  Direct Fit with 16.8v E-Maxx (#3905)

-  New braceless 3D plate design

-  Chassis assembly is 15% lighter than stock

-  Low center of gravity design

-  Natural finish 6061 T6 billet aluminum

-  1/8" thick upper plate for improved durability

-  Battery tray holds 6-8 cells per side

-  Stick pack or lipo ready

-  Mounting holes for single, dual or Novak EVX

-  Lowered transmission uses stock drive shafts

-  Heavy duty Velcro battery straps

-  Armor plated hexscrews.

1/8 Xcelorin Brushless Combo, 1300Kv
 

Key Features

• Powerful, 720-sized sesorless brushless four pole motor
• No motor maintenance required
• Precision motor ball bearings for smoother operation
• Sintered Neodymium rotor
• ESC features 160A continuous current with 800A peak
• Prewired Losi EC5 power connector
• Accommodates a 3-5-cell LiPo battery pack
• High-speed cooling fan for lower running temperatures and protection
• Optimized for Spektrum or legacy radio systems
• Internal and programmable BEC
• Adjustable low-voltage cutoff to protect your battery investment
• Forward/Brake with Reverse or Forward/Brake settings
• Forward and reverse throttle limiting available
• Four LEDs to indicate functions
• Three preset drive profiles: 3S, 4S and 5S
• Quick Programming Card allows adjustments to the ESC without the need for a computer
• Includes three pre-programmed profiles for convenience
• PC setup software CD included for complete configuration of profiles
• Software interface allows for unlimited profile settings and tuning
• Adjust brake and throttle curve settings with the simple-to-use graphical interface software

Overview

Xcelorin Brushless Systems from Losi represent the latest development in brushless power and performance. The 1/8-scale 1300Kv Xcelorin Sensorless Motor and Electronic Speed Control Combo will convert any 8IGHT-based race or RTR vehicle into an electric vehicle. Enjoy the brute torque and speed achieved through brushless technology with Losi’s 1/8-scale Xcelorin Sensorless Brushless Systems.

The Xcelorin Sensorless combo combines the performance features of the two components below to achieve the power and response needed for RC competitions.

1/8 Sensorless Motor- The powerful 720-sized Xcelorin Sensorless brushless motor offers performance designed features like a sintered neodymium rotor, precision motor ball bearings, and is virtually maintenance free.

1/8 Sensorless ESC - The feature packed Xcelorin Sensorless Electronic Speed Control features a high-speed cooling fan, pre-wired Losi EC5 power connector, accommodates a 3-5 cell LiPo battery pack, forward/brake with reverse or forward/brake settings, two preset drive profiles with unlimited potential with a PC and much more.
The ESC also includes a Quick Programming Card, which allows adjustments to the ESC without the need for a computer, and included three pre-programmed profiles for convenience.

This is the Tekin RX8 1/8th Scale Competition Brushless ESC. Tekin’s RX8 is big power in a small package. Based off of the proven RS series Speed Control the RX8 takes large scale current demands in stride. Leading the industry not only in power handling ability but size and features with Drag Brake, Neutral width, Throttle Profiles, Voltage Cut Offs for Lipos and much more. The RX8 sits at only 1.5 x 2.22 x 1.46, a small foot print making it easy to install on any chassis. Don’t negotiate the track, attack it with extreme prejudice.

Features
 

• Easily Access Programming, Anywhere, Anytime
• Drives Sensor/Sensorless Brushless and Brushed Motors
• D2: Dual Drive Mode Technology
• On-Board Temperature Indicator
• PC Interface for Custom Programming
• HDAC: High Density Copper Fet Boards
• Sensor Plug for Precise Commutation with all Motors
• Solder Posts for Easy Wire Replacement
• Self Test Diagnostics and Factory Reset
• Adjustable Drag Brakes
• RS-232 Digital Communications Protocol
• Pit Tune Mode
• DGF2: Digital Glitch Filtering V2
• QuickTune™ Programming
• One-Touch Radio Calibration

Programming Features
 

• Brake / Reverse Strength (13 steps)
• Current Limiter (none + 12 steps)
• Neutral Width (7 steps)
• Throttle Profiles (7 choices)
• Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
• Voltage Cutoffs (none, 2s, 3s, 4s, 6s, Custom)
• Timing Advance when used with Tekin Hotwire
• Extensive Tuning via Tekin HotWire PC Interface (sold separately)

Specifications
Controls: Forward/Brake/Reverse
Input Voltage: up to 6S Lipo
Continuous Current: 210 Amps*
BEC: 6.0V/5.0A
Motor Limit Brushless Mode: No Limit
Motor Limit Brushed Fwd Only Mode: No Limit
Motor Limit Brushed Fwd/Rev Mode: No Limit
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.5 x 2.2 x 1.4"
Weight Approx: 2.7oz

This extended suspension kit extends the width of the crt.5 suspension by .3" per side (total extension .6" wider than stock). Includes upper and lower suspension arms and linkage, including upgraded front upper arm rod end with custom insert for added strength and custom length cvd axles. Suspension arms are cnc machined from aircraft grade 6061T6 aluminum and include extra shock mounting positions to allow other shocks to be used (including revo/Jato shocks for the front). CVDs are cnc machined from stress resistant steel and heat treated for optimum durability.

Picture show the suspension kit installed on our extended length crt.5 chassis(not included).

Fast Lane Machine Complete Stampede or Rustle Chassis Kit.

Compatible with new VXL kits.

Complete Kit includes new 3.2mm cnc machined chassis(extended approx. 46mm), motor mount, front drive shaft, servo mounts(for full sized servo), custom chassis braces and receiver mount, battery box , aluminum draglink, steering brace and required screws.

All parts cnc machined from 6061 aluminum. Chassis cnc machined from 7075 aluminum and hard anodized black. Kit includes all parts, including motor mount.

 Are you ready to transform your brushless buggy or truggy to the next level of drivability, durability and tuning ability? Wait no more -the RC-Monster  Slipperential ™ 1/8 center slipper diff(Patent Pending) is ready to take you there!

 What is a Slipperential™ you say? It is just what it sounds like - a 1/8 center differential with an integrated slipper clutch .

If you’re a serious racer, or simply wish to decrease your chances of motor failure and improve the overall drivability of your electric 1/8 vehicle, then consider putting the Slipperential™ at the top of your  "must have" list of upgrades.

The unit is a "drop in" upgrade for Mugen, Losi, AE, XRay and similarly sized diff compartments on buggies and truggies. The aforementioned diffs are among the smallest on the market today, so the Slipperential™ can be shimmed into larger openings on many other vehicles.

Includes - instruction sheet  and all parts required to build one complete Slipperential™  1/8 center slipper diff(including our new super hard diff outdrives). User will need 8mm inside diameter bearings specific to their application(8x16x5 most common), as well as silicone diff fluid of choice, to complete assembly.

Options -

Hardened steel endcaps offer superior wear resistance and are recommended for high side loaded applications(Losi 8 front, for instance). 7075 hard anodized aluminum endcaps(original option) are half the weight of the steel version and are recommended for applications without high diff angles. Hardened steel 46t Mod1 spur  gear is standard - Optional spur gears: 58 tooth cnc machined hardened steel mod .8 , 46t cnc machined mod1 hardened steel and 52t cnc machined hardened steel mod1.

Please visit our forums for the latest Slipperential™ discussion and application information:

 http://rc-monster.com/forum/forumdisplay.php?f=45

Special thanks to Design Engineer Paul Cadima for making this project possible.

E-Maxx 3905 Extended Chassis 

High powered Boat controller.

Product Features:

-  Direct Fit - No modifications needed

-  Spec wheelbase and ground clearance

-  Chassis assembly 0.5oz lighter than stock

-  Improved front/rear gravity tuning

-  Natural finish 6061 T6 billet aluminum

-  Dual plate design cradles battery pack

-  Stick pack or lipo ready - up to 8 cells

-  RX mount holes on left and right side

-  Slotted EVX mounting fits multiple sizes

-  Heavy duty Velcro battery strap

-  Includes  metric hexscrews

-  No threadlock required

Product Features:

-  Direct Fit - No modifications needed

-  Spec wheelbase and ground clearance

-  Chassis assembly 3.0oz lighter than stock

-  Improved front/rear gravity tuning

-  3mm black carbon fiber

-  Dual plate design cradles battery pack

-  Stick pack or lipo ready - up to 8 cells

-  RX mount holes on left and right side

-  Slotted EVX mounting fits multiple sizes

-  Heavy duty Velcro battery strap

-  Includes  metric hexscrews

-  No threadlock required