Home Forums Search My Cart Sitemap Contact
     

























  Shopping Cart
0 Product(s) in cart
Total $0.00
» Checkout

We accpet Visa, Mastercard, or Paypal.
 
Secure Site Seal
 

USPS

 

 

 

Home » Vehicles » All Products

 Checkout
SortNumberSearch

« Previous | 1 | 2 | 3 | 4 | 5 | »

Aluminum EMaxx Chassis - VMaxx
Manufacturer: RC Monster

 

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks. The goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were the driving force for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - maximum total ground clearance is achieved, while center of gravity is significantly lower than stock. The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller straps. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Nearly identical to the stock chassis weight with all like components installed(battery holders on stock chassis, trays, screws and straps on V-Maxx chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining high center ground clearance and the legendary Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length -  chassis braces included with the chassis.
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if we get enough requests, we should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Removable transmission mounts - the separate, bolt-in tranny mounts locate the transmission exactly where it is on the stock truck, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
:
Price: $160.00
212.34 CAD | 103.95 GBP | 142.00 EUR
Add to cart

Savage Extended Arm Conversion - From FastLane Machine

 

Savage Extended Arm Conversion - From FastLane Machine *Extended upper arms included*

Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

 

:
Price: $150.00
199.07 CAD | 97.46 GBP | 133.13 EUR
Add to cart

Fastlane Stampede/Rustler Super Extended Chassis Kit
Manufacturer: Fastlane Machine
Based on 1 ratings. (View)

 

Fast Lane Machine Complete Stampede or Rustler Extended Chassis Kit. This chassis kit is 1" longer than stock.

Compatible with new VXL vehicles!

Item may be drop shipped if not in stock - may take up to 2 weeks for drop ships during peak periods.

This item not eligible for flat rate shipping.

:
:
Price: $150.00
199.07 CAD | 97.46 GBP | 133.13 EUR
Add to cart

Front and Rear Combo Bulk

 

  • Strongest design available.
  • Lightweight.
  • Diff case built onto the bulkhead.
  • Extra support for hinge pins.
  • Increased driveline strength.
  • Option parts available.
  • Bulks are machined out of billet 6061 aluminum for durability and strength.
  • Fast Lane’s extreme abuse warranty.
  • Replacement cost per side $15.00.

 

Item may be drop shipped directly from FastLane Machine if not in stock in our facility(up to 3-4 weeks processing time).

 

 

 

 

 

 

 

 

 

  • The design is lighter when compared to other aluminum bulks and diffs. Lightweight is achieved by removing material out of areas were it once was not possible. These are by far the strongest bulkheads available. By machining the diff case onto the bulk, the bulkhead is now bolted together from the side. Instead of held together by the bulk brace, chassis, skid plate and shock tower. Now these items are strengthened by this design. By using this design you can also make other parts significantly lighter, because they are no longer a deciding factor in the strength of the bulkhead. For even lighter weight you can toss out the bulk brace, it will no longer be needed with this design. The Bulkhead has even had a revision with this design. Now the hinge pins have an extra support to resist bending. Driveline strength with design has greatly been increased. With absolutely no movement or flexing of the diff case the gears will not try to separate, greatly increasing the life of your gears. Option parts available for this bulk design. Now even lighter weight shock towers and skid plates.

     

     

     

     

     

     

     

     

     

     

     

  • :
    Price: $120.00
    159.25 CAD | 77.96 GBP | 106.50 EUR
    Add to cart

    Low Cg Emaxx Chassis - Fastlane Machine

     

    We designed this chassis with the idea of keeping the batteries as low as possible.

    Adjustable battery system: will accept nearly any battery available.

    Complete kit: includes everything for an easy swap.

    Item may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to

    weeks for processing).

     This item not eligible for flat rate shipping.

    Price: $104.00
    138.02 CAD | 67.57 GBP | 92.30 EUR
    Add to cart

    7075 120T F&R ROCKER ARMS W/BEARINGS x 8, REVO.
    7075 120T F&R ROCKER ARMS W/BEARINGS x 8, REVO.
     
    Price: $100.00
    132.71 CAD | 64.97 GBP | 88.75 EUR
    Add to cart

    Aluminum Transmission Case For Emaxx 3903, Emaxx 3905, Emaxx 3908, Erevo 5605 & Erevo 5608

     

    Aluminum Transmission Case For Emaxx 3903, Emaxx 3905, Emaxx 3908, Erevo 5605 & Erevo 5608

    This case replaces Traxxas Part #3991X. This case is compatible with Emaxx models 3903, 3905, 3908. (Not compatible with Emaxx 3906) This case is also compatible with eRevo (TRA5608 and TRA5605).

     

    Price: $90.00
    119.44 CAD | 58.47 GBP | 79.88 EUR
    Add to cart

    T-Maxx/E-Maxx Front Hybrid Bulkhead from FastLane Machine

     

     

     

     

     

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Increases strength to entire bulkhead section
  • This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches)
  • Diff case and bulk are machined into one unit
  • Includes lower arm pin

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

  •  

    Price: $75.00
    99.53 CAD | 48.73 GBP | 66.56 EUR
    Add to cart

    T-Maxx/E-Maxx Rear Hybrid Bulkhead from FastLane Machine

     

     

     

  • Made in the USA
  • CNC Machined from billet 6061 aluminum
  • Increases strength to entire bulkhead section
  • This bulk accepts 1/8 scale style diffs (ring gear must be less the 1.500 inches)
  • Diff case and bulk are machined into one unit
  • Includes lower arm pin

     

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

     

     

     

  • Price: $75.00
    99.53 CAD | 48.73 GBP | 66.56 EUR
    Add to cart

    FastLane machine Savage XL Hybrid Bulkheads
    Based on 1 ratings. (View)

     

    • Machined from billet 6061 aluminum
    • Eliminates stock bulkhead and diff case by combining into one unit
    • Eliminates chassis support at TVP mount
    • Eliminates bulkhead brace
    • Superior strength
    • Weighs 191 grams
    • Includes all necessary mounting hardware
    • Accepts stock gears with no modification

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    Not eligible for flat rate shipping.

    Price: $72.00
    95.55 CAD | 46.78 GBP | 63.90 EUR
    Add to cart

    Savage Hybrid Bulkhead - from FastLane Machine

     

    Savage Hybrid Bulkhead - from FastLane Machine

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

     

    Price: $60.00
    79.63 CAD | 38.98 GBP | 53.25 EUR
    Add to cart

    FastLane savage Super Hybrid Bulks

     

     

  • New! Super Hybrid Bulk
  • BULLET PROOF YOUR SAVAGE
  • Fits Buggy style diffs (Hot Bodies diff c8084-1 and Pinion c8030)
  • Fits CEN diffs
  • Diffs are a direct drop in no shimming or mods necessary
  • We recommend FLM48000 draglink

     

    These items may be drop shipped from Fastlane - may take up to 3 weeks to arrive

  • Price: $60.00
    79.63 CAD | 38.98 GBP | 53.25 EUR
    Add to cart

     
    Manufacturer: Fastlane Machine

     

    Machined from billet 6061 aluminum
    4.7mm (.187") thick for extreme abuse
    .500 lower center of gravity Extended 40mm
    Tapped for center skid plate Driveshaft with lifetime warranty
    Seperate kits available for inline throttle and steering servo mount, fuel tank relocation and center skid plate 

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).


     

     

    Price: $60.00
    79.63 CAD | 38.98 GBP | 53.25 EUR
    Add to cart

    CNC stampede/rustler transmission case
    Manufacturer: Fastlane Machine
    Based on 1 ratings. (View)

     

    The ultimate bling for the electric stampede/rustler. Transmission case made of cnc aluminum! Part may differ slightly from picture.

    Items may be drop shipped directly from FastLane Machine if not in stock in our facility(may take up to 3 weeks for processing).

    :
    Price: $60.00
    79.63 CAD | 38.98 GBP | 53.25 EUR
    Add to cart

    « Previous | 1 | 2 | 3 | 4 | 5 | »

    See a product not listed?  Let us know.

     Click here to fill out out Parts Inquiry form

         

    Home | Forum | Gorillamaxx | EMAXX | RC Monster Parts | Brushless Motors | Brushless Controllers | Traxxas Hopups | Order Tracking | Fast Lane Machine | Search | Sitemap | Contact Us

     

    Secured by RapidSSL

     

    Site designed by MaxxFusion Technologies

    Hosted by: MidPhase