1 piece motor mount and single servo tray/rx mount for Ofna Jammin' X1 CRT truck.

Drop in mount for mounting electric motors in XRay XT8 and XB8 vehicles. Black annodized. Includes servo plate for steering servo (no need to cut stock parts).

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Motor mount for converting Ofna GTP road car and the Ofna Ultra series buggies to electric power.

Positions Motor in right rear area of truck(behind steering servo). Allows use of mechanical brakes(gearing may be limited if retaining the brakes at the rear). 

Bolt on replacement makes your conversion easy.

Electric Motor Mount for Losi Muggy and Sportwerks buggy. Black Anodized 7075 aluminum.

3 piece mount allows direct mounting of a single electric motor in the stock Nitro Revo motor mount location.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo). Spacer plate lifts diff assembly to allow stock spur gear clearance.

 New design uses a pivot point at the lower attachment location, so motor installation and mesh adjustments are easily accomplished using a single screw located at the top side of the mount for easy access. Mount accomodates M3 or M4 motor screws as well (screws are included for either size motor attachment screw).

Electric motor mount for Mugen buggy/truggy vehicles.  Motor mount fits MBX4, MBX5, MBX5T, MBX6 and MBX6T vehicles(select appropriate servo plate for intended vehicle).

New design uses a pivot point at the lower attachment location, so motor installation and mesh adjustments are easily accomplished using a single screw located at the top side of the mount for easy access. Mount accomodates M3 or M4 motor screws as well (screws are included for either size motor attachment screw).

Electric motor mount for Team Associated RC8 buggy or Truggy. Includes new servo tray with integrated receiver mount(replaces CF stock servo plate and creates a home for your receiver)!

Allows use of mechanical brakes(gearing is limited when utilizing mechanical brakes - servo arrangement must be made). 

 New design uses a pivot point at the lower attachment location, so motor installation and mesh adjustments are easily accomplished using a single screw located at the top side of the mount for easy access. Mount accomodates M3 or M4 motor screws as well (screws are included for either size motor attachment screw).

Electric motor mount for SX8 buggy by TQ racing. replaces rear center diff bulkhead and allows easy install of electric motor with 25mm or 1 inch hole spacing. new design allows m3 or m4 screws to be used and motors can be quickly and easily installed and adjusted with a single screw.

Includes:

1 - motor mount

1 - lower swivel bushing

1 - M3 washer (used only with M3 screw installation)

1 - M4 button head screw (used only with M4 screw installation)

2 - M3 button head screws for motor mount top

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

New design removes weight and allows use of mechanical brakes(gearing may be limited).