Electric motor mount for O'Donnell SB01 buggy.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Lightweight design weighs approximately 1.5oz after machining. Bolt on replacement to make your brushless electric conversion easy!

Requires modification of the stock radio tray. We recommend 36mm motors for this vehicle to allow motor clearance at the rear chassis brace.

Electric motor mount for Ofna Hyper series buggies and truggy.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Lightweight design weighs approximately 1.5oz after machining. Bolt on replacement to make your brushless electric conversion easy!

Requires modification of the stock radio tray.

Electric motor mount for Hot Bodies D8 buggy.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Lightweight design weighs approximately 1.5oz after machining. Bolt on replacement to make your brushless electric conversion easy!

Requires modification of the stock radio tray.

Replaces rear center diff bulk for mounting a single electric motor at the right rear position of the truck (behind the steering servo).

Universal fit 17mm wheel adapter installs onto existing 12mm wheel hexes(2.2 or 1/10 truck wheels). Adapter adds .435" offset and 17mm nut is threaded to fit 4mm wheel axle (Slash,CRt.5, Mini Hyper, etc.). Nut includes 4mm set screw for extra security against loosening. Adapts 1/8 buggy wheels to Slash 4wd, Crt.5, mini Hyper and similar vehicles. CNC Machined from 7075-T6 Aluminum.

Allows a standard "540" electric motor to mount directly to the Ofna crt.5 1/12 truggy. Mount replaces rear center diff bulk.

Replacement threaded Diff Cup for Slipperential™ 1/8 Center Diff.

High density plastic battery tray cnc machined from a solid sheet. Trays sized to fit the current Flight Power and Poly Quest 5000mah Enerland packs, Maxamps size packs, or your own custom size. Includes battery tray, dual wrap-around velcro straps and screws for installation.

1 piece designs allow 1.25" clearance to mud guard and has no spacer - this design fits most vehicles. Please verify 1.25" clearance from center spur gear to mud guard prior to ordering.

Please inquire on size restrictions for custom trays - custom sizes will require additional time for production. 1 inch maximum tray height (limited by material stock).

When ordering a custom tray, please leave a note regarding requested size when you check out. If ordering a standard size tray, please leave the custom option blank.

RC8 tray is specific to our RC8 buggy and truggy chassis kits and does not have the mud guard clearance. CRT.5 tray is specific to our Ext. crt.5 chassis kit. MBX6B, MBX6T and XB808 trays are designed to "bolt on" to the stock chassis for these vehicle and feature an integrated esc shelf and pre-drilled holes for battery tray and esc attachment, along with a pocketed underside for esc wire routing.

Available exclusively at RC-Monster, this heatsink was designed with the brushless user in mind. It wraps perfectly around the motor can for the most effective heat dissipation, and also functions as a clamp to keep Feigao, Hacker and similar pressed endbell type motors intact. "S", "L", and "XL" sizes available for 50mm, 60mm, and 74mm motors. This heatsink will fit any 540 size motor (36mm diameter can), brushed or brushless, and is a great heatsink that will not fall off your motor (rear clamp not necessary for all motors).

"S" fits 50mm can length

"L" fits 60mm can length

"XL" fits 74mm can length

Slipperential™ 1/8 Center Diff  Spur Gear replacement. More options will be added as they are developed.

Spare Delrin spur gear for RC-Monster converted Losi Ten T

Mod .8 - 52t gear machined to match Losi ten t center diff(stock replacement).

Custom CNC machined steering servo mount and receiver box.   1.9" x 1.1" x 1.1" interior dimensions allow most current receivers to be enclosed. Features integrated servo mounts and antenna tube hole for factory look and functionality with electric converted vehicles. D8/D8T box fits stock chassis. XT8 box fits RC-Monster chassis kit only.

Includes diff bevel shafts, o-rings, spider gears, crown gears, and gaskets required to rebuild the diff in our Slipperential™ 1/8 center diff.

 *NEW* Slipperential™ 1/8 Center Diff Outdrives.  Includes 2 ( Enough for 1 complete Diff ) premium hardened steel, precision ground differential out drives. 

Large Diff Cap for Slipperential™  1/8 Center Diff used for slipper side. NEW DESIGN allows use of most other manufacturers diff out drives.