PDA

View Full Version : got me a little problem


ikpthegame
08.14.2009, 10:03 PM
So my RX8 and 1550kv motor has been sweet, until today. I just redid my wiring since I moved the esc, and it worked great for a while. I started to jump the truck and took a weird landing and it stoped responding. Then after a few seconds it starts to move again but only for 5 feet. I could turn it off and back on and it would only move 5 feet again. Now when it trys to arm I dont get any beeps but the leds on the esc say its armed, but no go. So any idea? I checked all of the wires and they are good.

What's_nitro?
08.14.2009, 10:43 PM
Have you tried running it sensorless? Maybe they were damaged in the wierd landing some how...

ikpthegame
08.15.2009, 12:30 AM
yup thats the first thing i tried.

What's_nitro?
08.16.2009, 02:11 AM
Re-load/update the firmware, perhaps....?

ikpthegame
08.16.2009, 04:24 AM
i reset it, but there is something wrong since it happened after the jump

What's_nitro?
08.16.2009, 04:34 AM
Well then... I guess you really knocked something loose. Is it OK by Tekin for you to open the case? Maybe it's obvious what's wrong inside...

ikpthegame
08.16.2009, 04:53 AM
ya idk, but the screws on my case came striped lol

TekinTeamMgr
08.16.2009, 10:43 PM
Well if you stripped the case you've got no choice but to send it in.

Support@teamtekin.com

What's_nitro?
08.16.2009, 10:46 PM
I think he meant the screws were already stripped when he got it.

ikpthegame
08.17.2009, 01:45 AM
ya the screws were striped when i opened the box lol.

ikpthegame
08.27.2009, 12:34 AM
sent it out today, whats your turn around time right now tekin?

raub
08.31.2009, 11:09 AM
I've got exactly the same trouble as you described with my new RX8
A run of 3 minutes/2 jumps then nothing else. The ESC seems to work as LEDs are OK except no more beeping during the power ON.
How did you manage with TEKIN ? Did you sent it back ?
Regards

Raub

TekinTeamMgr
08.31.2009, 12:33 PM
Please email me here for some help: Rpike@teamtekin.com

ikpthegame
08.31.2009, 01:39 PM
i sent my esc in since that what they said the problem was when i called. i need to call to see if they have got it yet.

raub
09.02.2009, 03:12 PM
Mine is going back as soon as I get news from TEKIN Support. Wait and See