RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Pre Sales Questions (https://www.rc-monster.com/forum/forumdisplay.php?f=6)
-   -   RCM Universal Diff/Motor Mount & Neu 1527 (https://www.rc-monster.com/forum/showthread.php?t=31226)

IrishChamp 04.23.2012 05:08 PM

RCM Universal Diff/Motor Mount & Neu 1527
 
I'm wondering if the Universal Mount accepts the m4 motor screws the 1527 uses as well as fits the small lip around the shaft/ bearing on the front of the motor, the 1527 will not sit flush against the mount I intended to use on this project:
http://www.rc-monster.com/forum/showthread.php?t=31140

Thanks!

RC-Monster Mike 04.23.2012 06:14 PM

Yes on the bearing boss but no on the M4 screws - the universal mount is machined for m3 motor attachment screws. That said...I could make it compatible for m4 screws if I know in advance that it is needed. I will be doing a batch of these this week most likely. :-)

lutach 04.23.2012 06:29 PM

I don't think you'll get better service anywhere else. Get Mike's mount and you'll have a solid item that Mike backs up 100%.

IrishChamp 04.23.2012 06:53 PM

A couple more questions;
1) in the picture in the store I don't see mounting threads/holes drilled on the feet of the mount, is this the way it is shipped?
2) if it does have mounting threads in the feet does the mount come with a template for drilling holes in the chassis to attach it?
Thanks

RC-Monster Mike 04.24.2012 10:55 AM

Yes, the mount pieces are tapped m3 on the bottom for mounting and a drill template is available(distance of the two uprights may vary with the chosen diff, however).

IrishChamp 04.24.2012 12:24 PM

Thanks Mike, I'll take one modified to accept the m4 mounting screws of the Neu 1527. :)
Should I just pay in the store or send payment another way?


Quote:

Originally Posted by RC-Monster Mike (Post 420414)
Yes, the mount pieces are tapped m3 on the bottom for mounting and a drill template is available(distance of the two uprights may vary with the chosen diff, however).


RC-Monster Mike 04.24.2012 01:02 PM

YOu can go ahead and order through the store - just leave a note regarding the M4 motor mounting screws and I will modify one for you. :-)

IrishChamp 04.24.2012 01:34 PM

Order placed. Order # 10022884
Thanks! :)


All times are GMT -4. The time now is 06:57 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.