RC-Monster Forums  
RC Monster

Go Back   RC-Monster Forums > Questions and Answers > Pre Sales Questions

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#16)
ssspconcepts
RC-Monster Aluminum
 
ssspconcepts's Avatar
 
Offline
Posts: 834
Join Date: Feb 2007
Location: Aubrey, Texas
01.03.2009, 10:19 AM

Ofna Jammin CR buggy and CRT are interchangeable. However, keep spur size in mind since the CR mount sits much lower/closer to the chassis...a large truggy spur used in conjunction with the CR mount could rub on the chassis. Additionally, either Jammin CR/CRT (CR is preferred because it promotes a lower center of gravity) mount will work with the DM-1 or DM-1 Spec.
   
Reply With Quote
will ofna gtp motor mount work for dm one
Old
  (#17)
rcmaxx90
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Dec 2007
will ofna gtp motor mount work for dm one - 03.08.2009, 11:43 PM

since chassis are similar
   
Reply With Quote
Old
  (#18)
jhautz
RC-Monster Mod
 
jhautz's Avatar
 
Offline
Posts: 4,215
Join Date: Apr 2006
Location: Chicago, IL
03.09.2009, 03:42 AM

Quote:
Originally Posted by rcmaxx90 View Post
since chassis are similar

The Jammin (Ofna) CR Buggy motor mount is a direct drop in for the DM1. I used it in mine. The DM1 uses the Jammin dif uprights.

http://www.rc-monster.com/proddetail...CMcrbuggymount


I can't decide if its more fun
to make it...
or break it...


Silent...But Deadly



Last edited by jhautz; 03.09.2009 at 03:43 AM.
   
Reply With Quote
thanks
Old
  (#19)
rcmaxx90
RC-Monster Stock
 
Offline
Posts: 4
Join Date: Dec 2007
thanks - 03.12.2009, 09:52 PM

just the info i needed. Thanks Dude!
   
Reply With Quote
Old
  (#20)
riceman
RC-Monster Gold
 
riceman's Avatar
 
Offline
Posts: 281
Join Date: Oct 2006
08.03.2009, 10:05 AM

Quote:
Originally Posted by Christophe View Post
Hello, the Kyosho RCM motor mount is for the MP7 series and doesn't fit the MP9 .
Will the MP7 series mount work with the GT1 and GT2 on-road cars?
   
Reply With Quote
Old
  (#21)
Arct1k
RC-Monster Mod
 
Arct1k's Avatar
 
Offline
Posts: 6,593
Join Date: Apr 2007
Location: NJ
08.03.2009, 10:08 AM

I believe its the standard Koyosho one...

http://www.rc-monster.com/proddetail...rcmkyoshomount
   
Reply With Quote
Old
  (#22)
HootMaRoot
RC-Monster Stock
 
HootMaRoot's Avatar
 
Offline
Posts: 10
Join Date: Oct 2009
10.17.2009, 07:37 PM

does anyone know if any of the mounts will fit onto a thunder tiger ER-1 ?
   
Reply With Quote
Old
  (#23)
RC-Monster Mike
Site Owner
 
RC-Monster Mike's Avatar
 
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
10.17.2009, 10:49 PM

We have the ST-1 Thunder Tiger mount - not familiar with the ER-1, though? is it the same car? Got a link?
   
Reply With Quote
Old
  (#24)
pinkpanda3310
RC-Monster Titanium
 
pinkpanda3310's Avatar
 
Offline
Posts: 1,152
Join Date: Sep 2008
10.18.2009, 01:27 AM

Just out of curiosity, is there a mount that is symetrical top to bottom so it can be flipped upside down? That would give the option of mounting the motor on the left or right of the spur.
   
Reply With Quote
Old
  (#25)
HootMaRoot
RC-Monster Stock
 
HootMaRoot's Avatar
 
Offline
Posts: 10
Join Date: Oct 2009
10.18.2009, 07:00 AM

http://www.tiger.com.tw/product/6238-F.html <== link to TTR ER-1

i thought it would have been the same as the ST-1 mount as the chassis is almost the same but it wont fit the ER-1.

i have found a model which center diff mount fits but again it isnt a popular design/make [ GV models REX X ]
   
Reply With Quote
Old
  (#26)
RC-Monster Mike
Site Owner
 
RC-Monster Mike's Avatar
 
Offline
Posts: 4,915
Join Date: Nov 2004
Location: PA
10.18.2009, 10:57 AM

The CR Buggy(Jammin') mount has the same hole pattern on top and bottom, but the top uses m3 screws and the bottom uses m4 screws. I don't know if the bearing hole is centered top to bottom, but it is pretty close. Most of the mounts do allow the entire center diff assembly to be reversed by adding a spacer underneath for spur gear clearance(puts motor in left front opposite the steering servo and is common position for dual battery conversions).


The easiest way to determine compatibility is to match the center diff bulk part numbers - if another car uses the same part number and the ST-1, then the ST-1 motor mount would likely fit. :)
   
Reply With Quote
Old
  (#27)
Christophe
Guest
 
Posts: n/a
11.01.2009, 01:52 PM

Hello,
it seems the Thunder tiger ST1 motor mount should be the same for the EB4 S3, is there anyone to confirm?
Thank you :).
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump



RC Monster




Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com