RC-Monster Forums  
RC Monster

Go Back   RC-Monster Forums > Support Forums > Fastlane Machine

Reply
 
Thread Tools Rate Thread Display Modes
Differential part #'s for FLM Hybrid Bulks
Old
  (#1)
override
RC-Monster Stock
 
override's Avatar
 
Offline
Posts: 5
Join Date: Oct 2012
Location: San Antonio, TX
Differential part #'s for FLM Hybrid Bulks - 10.13.2012, 10:39 AM

Hello,

I know that the T-Maxx is slowly dying but there are still a good amount of people out there that are building them up. FLM is one of the few places that still carry a full line of T-Maxx parts, but they are starting to discontinue some of them.

I myself recently built a full FLM T-Maxx and had to do quite a bit of searching to find part numbers for the differentials. I see a lot of threads here asking what combinations can be used in there Hybrid bulks as well.

I don't know if there is a thread listing part numbers or not so I'm sorry if there is and this ends up being a double...

From my searching this is a small list of differentials that can be used in the FLM Hybrid bulks for the T-Maxx and I am sure for the Savage as well. It is not complete but it is enough to get someone what they need! Feel free to correct any mistakes you may see.

Caster Racing PRO Buggy - 8x16x5MM Bearings - Pinions stepped to 5mm

ZX-0114 Complete Diff
ZX-0121-PRO Crown Gear Set (43t &13T)
ZX-0061-PRO Pinion Gear (13T)
ZX-0060-PRO Diff Gear (43T)
ZX-0119 Buggy Steel Spiral Bevel Gear (43T) - FLM uses
ZX-0120 Buggy Steel Sprial Pinion (10T) - FLM uses

Losi LST2 Differential

LOSB3529 Complete Diff
LOSB3534 Ring and Pinion set

Ofna Hyper 7 Spiders (8 gear)

OFN87343 Complete Diff
OFN19028 Spider Gear

Ofna Hyper 7 TQ Differential

OH15 Complete Diff w/bulk (Can find part # for just the diff)
19001 Bevel Gear (43T)
19028 Pinion Gear (13T)
19002 Cup Gears
19004 Diff Cup

Ofna 9.5 Differential

OFN40007 Complete Diff
OFN49032 Bevel Gear (43T)
OFN49012 Pinion Gear (13T)
OFN49001 Cup Gears (steel)
OFN40003 Diff Cup
OFN40009 O-Ring

HPI Savage Differential

HPI86127 Plastic Housing Complete Diff (43T)
HPI86826 Alloy Housing Complete Diff (43T)
HPI86031 Pinion Gear (13T)
HPI86030 Bevel Gear (43T)

Last edited by override; 10.13.2012 at 10:41 AM.
   
Reply With Quote
Old
  (#2)
override
RC-Monster Stock
 
override's Avatar
 
Offline
Posts: 5
Join Date: Oct 2012
Location: San Antonio, TX
11.29.2013, 04:49 PM

I want to add CEN Racing GST 7.7/Nemesis Diffs, I cannot find these offered through CEN as a complete unit but nevertheless eBay has them.

CEN Differential (The bearings that come with these are 8x16x4mm, I recommend getting some rubber sealed 8x16x5mm)

MX040 Ring Gear (26T)
MX037 Pinion Gear (9T)
MX230 Spider Cross Pins
GS001 Diff Case (cup)
GS060 Diff Case Cover
GS220 Diff Case Gaskets
GS002 Diff Bevel Gears (spider gears)
GS36101 Diff Case Screws
G70306 Diff O-Rings
G36721 3mx10 Drive cup pin
GS029 Drive Cups (T-Maxx CVDs will fit these cups)

Final Drive Ratio is 2.89

Last edited by override; 11.29.2013 at 04:56 PM.
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump



RC Monster




Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com