RC-Monster Forums  
RC Monster

Go Back   RC-Monster Forums > Support Forums > Mini truggy

Reply
 
Thread Tools Rate Thread Display Modes
2S li-po with a nemesis 8L for a crt.5 ?
Old
  (#1)
Daddydancool
Guest
 
Posts: n/a
2S li-po with a nemesis 8L for a crt.5 ? - 06.17.2008, 11:48 PM

I just received my monster conversion kit for my crt.5 and I already have a couple of 6000mah 2S maxamps, so i was wondering if i can use this motor http://www.finedesignrc.com/nemesisspecs.htm which gives 3072rpm/v
and also what kind of pinion should i use? something big like close to 20t? if this motor is not good, any suggestion for a motor ?
Thanks for your help guys!
   
Reply With Quote
Old
  (#2)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,934
Join Date: Aug 2007
Location: Slidell, LA
06.17.2008, 11:51 PM

Quote:
Originally Posted by Daddydancool View Post
I just received my monster conversion kit for my crt.5 and I already have a couple of 6000mah 2S maxamps, so i was wondering if i can use this motor http://www.finedesignrc.com/nemesisspecs.htm which gives 3072rpm/v
and also what kind of pinion should i use? something big like close to 20t? if this motor is not good, any suggestion for a motor ?
Thanks for your help guys!
I would go with a 7l, and run a 16t pinion, will run cooler than the 8l with the higher gearing (more load), and get it from offshoreelectrics.com

Or see if Mike here at the rcm store can get you a feigao 380c 6l motor. Those are good motors.
   
Reply With Quote
Old
  (#3)
Daddydancool
Guest
 
Posts: n/a
06.18.2008, 12:02 AM

ok great i also have this motor in stock! i ran it in my t4 before i switched for a mamba motor!
if the shaft is smaller, i just have to use a bore reducer?
last question, with the 6l, what kind of pinion shoul i use? i'm not looking for a top speed record, (especially with a 2s)
Thanks
   
Reply With Quote
Old
  (#4)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,934
Join Date: Aug 2007
Location: Slidell, LA
06.18.2008, 12:04 AM

Quote:
Originally Posted by Daddydancool View Post
ok great i also have this motor in stock! i ran it in my t4 before i switched for a mamba motor!
if the shaft is smaller, i just have to use a bore reducer?
last question, with the 6l, what kind of pinion shoul i use? i'm not looking for a top speed record, (especially with a 2s)
Thanks
Yeah, you need a hardened pinion to run on the crt.5 steel spur. Rcm sells the bore reducers to fit the 5mm bore pinions on a 1/8 shaft. I would go with a 13t pinion to start, and see how that does.
   
Reply With Quote
Old
  (#5)
Daddydancool
Guest
 
Posts: n/a
06.18.2008, 12:24 AM

i'm ordering those parts, thanks for your help!
   
Reply With Quote
Old
  (#6)
lincpimp
Check out my huge box!
 
lincpimp's Avatar
 
Offline
Posts: 11,934
Join Date: Aug 2007
Location: Slidell, LA
06.18.2008, 12:25 AM

Quote:
Originally Posted by Daddydancool View Post
i'm ordering those parts, thanks for your help!
No prob, welcome to the forums!
   
Reply With Quote
Old
  (#7)
Daddydancool
Guest
 
Posts: n/a
06.19.2008, 12:40 PM

i was just about to order my motor and i just saw that i might have a motor that i got in a trade, never used it.. feigao 540 6S 5,915 RPM/Volt 5mm Shaft,
i guess it's enough rpm for a 7.4V, is it?
Thanks!
   
Reply With Quote
Old
  (#8)
GO-RIDE.com
RC-Monster Carbon Fiber
 
Offline
Posts: 405
Join Date: Jun 2007
06.19.2008, 04:46 PM

Quote:
Originally Posted by Daddydancool View Post
i was just about to order my motor and i just saw that i might have a motor that i got in a trade, never used it.. feigao 540 6S 5,915 RPM/Volt 5mm Shaft,
i guess it's enough rpm for a 7.4V, is it?
Thanks!
That should be a good motor on 2S. I run a 6400 KV Novak 6.5 motor on 2S and it works out good.


E-CRT.5 Monster - RCM chassis, MM/Medusa 50x3300/3s, truck tires, 1/8 shocks
E-CRT.5 Stock - Sidewinder/4600/2s, buggy tires
E-8ight - Tekin RX8 2000kv/4S
E-8ight T- Tekin RX8 1700kv/5S
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



RC Monster




Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com