RC-Monster Forums  
RC Monster

Go Back   RC-Monster Forums > Support Forums > Brushless

Reply
 
Thread Tools Rate Thread Display Modes
Old
  (#16)
IGT_7x
RC-Monster Carbon Fiber
 
IGT_7x's Avatar
 
Offline
Posts: 55
Join Date: Mar 2009
Location: San Diego, CA
11.05.2010, 07:03 PM

Well, the first thing I would do is a little tricky, you will need a dremel or something similar because you will have to cut both the front & rear housing where the diffs are because rocks can get trapped there and the belts will snap. Also if you want it to drift you can lock the the rear diff, I used a glue gun & then change the front diff to a one way unit. With that setup it will perform pretty good. Right now I replaced some parts to aluminum & I also replaced the chassis to aluminum so it would add some heft to it. Oh yeah you probably want to replace the dampers to aluminum. As far as the bodies, there's a lot of body options, I just bought the HPI Lexus ISF body for mine.

http://www.hpiracing.com/products/en/17542/

Last edited by IGT_7x; 11.05.2010 at 07:05 PM.
   
Reply With Quote
Old
  (#17)
hooppjs
RC-Monster Stock Maggot
 
hooppjs's Avatar
 
Offline
Posts: 68
Join Date: Nov 2009
Location: Sydney Australia
11.05.2010, 07:44 PM

Not sure if you guys know, but there is another forum about the GT/GT2 & Landmax here: http://forums.radiocontrolzone.com/f...play.php?f=345

We have written in there since 1000BC. You can ask for a second hand car as they often pop up. Most of em, like me, are die hard Kyosho nutters and would prefer to help you out rather than make profit. I have sent a heap of parts to the US, sometimes free, just to get a fan up and running. Works backwards for me with US, UK help.

Some of the brushless 1/8's were down many many years ago.


100% recycled electrons were used in this message.
   
Reply With Quote
Old
  (#18)
Manne
RC-Monster Carbon Fiber
 
Offline
Posts: 163
Join Date: Mar 2010
02.16.2011, 06:21 PM

Well, Iīm here again, I want this project finished for the spring...And now I got a bigger budget to play with so I have started to think 1/8, It feels more controlable on 5 or 6s, Iīm thinking of using this esc instead wich I have in my revo:

http://www.hobbyking.com/hobbyking/s...dProduct=10370

And this motor:

http://www.hobbycity.com/hobbyking/s...idProduct=6678

But on what platform!?

I have been thinking of:

subaru impreza body
http://www3.towerhobbies.com/cgi-bin...?&I=LXLGB3&P=7

Hpi wheels:
http://www3.towerhobbies.com/cgi-bin...I=L5VGY002&P=7

Hpi tires:
http://www3.towerhobbies.com/cgi-bin...I=L5M97902&P=7

For the street and:

Hpi wheels:
http://www3.towerhobbies.com/cgi-bin...?&I=LXZPX9&P=7

Tamiya tires:
http://www3.towerhobbies.com/cgi-bin...?&I=LXGG35&P=7

For the rest.

A stock 1/16 scale mini revo/summit/slash/rally has a wheelbase of 21cm. If I extend it in the front with a traxxas cvd/integy/customparts hybrid It will be 26cm, perfect for that body and all other 200mm bodys.

If I go for this I will use the Old esc/motor combo I listed and run 4s.

But.... I want to build a 1/8 scale, feels more controllable at high speeds, feels more "real".

I want a platform that isnīt rare to find.... And I want it to be easy to find spare parts.. Thatīs why itīs tempting to build of a traxxas 1/16 chassis...I have built a few revos with alot of different setups, driven them for many hours so the reability of a build like that wouldnīt be a problem, itīs just that I want it bigger.....

Maybe this one?
http://www3.towerhobbies.com/cgi-bin...?&I=LXZBR8&P=7

Help a black man out.
   
Reply With Quote
Old
  (#19)
phatmonk
RC carbon junkie
 
phatmonk's Avatar
 
Offline
Posts: 634
Join Date: Dec 2007
Location: Iowa
02.16.2011, 07:29 PM

Ofna has the 1/8 GTP it's a brushless specific onroad car.It comes as a rolling chassis.I had 1of these cars and it was a blast.


SC8-E RCM MMM CC 1717
Slash 4x4 MMP CC SC 2400
SC RC8BE MMP Neu Tekno 1512/2D
Mugen MBX6 Eco MMP Neu Tekno 1515/1.5D
   
Reply With Quote
Old
  (#20)
bdebde
That's All Folks!
 
bdebde's Avatar
 
Offline
Posts: 2,359
Join Date: Dec 2006
Location: in a VAN down by the RIVER
02.16.2011, 09:13 PM

THIS is the one you want. The other 1/8th you linked to is the dirt oval model... I believe it has a few "dirt oval" specific parts. The one I linked to is specifically for on road. I had a GTP as well, they are a blast!
   
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump



RC Monster




Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
vBulletin Skin developed by: vBStyles.com