Crt .5 front and rear shocks for sale?

Does anyone wanna recommend me a setup that will work on my CRT i dont feel like fishing around and trying to figure out which shocks work and dont work...

I guess if there is a part number or something that works perfectly i could always just buy them myself, but if someone has them laying around and wants some cash let me know!!!

[Arct1k]

I assume you mean CRT.5 - You need revo fronts with jato springs and buggy fronts for the rear...

And sorry wrong place for wanted items

sorry bout that, i was just looking for someone who might have them from a parted out car or something. ill try in the for sale sections.

Do you happen to have a part number for anything =D

are these the front shocks?

http://fastserve.horizonhobby.com/Pr...RA5460-450.jpg

and then get the pink jato springs?

[Arct1k]

Yes - You can just get them off ebay as revo shocks

just placed order for those and the pink springs, $17 total =P

im gonna see if my SC8e front shocks will work for the rear

[Arct1k]

should be fine

do you think this will be a problem? seem like 16mm bore is a bit too wide and im getting some rubbing.

[Arct1k]

Should be ok -I;d add a ball in the centre...

Most of us were using OFNA LX 12mm shocks IIRC...

http://cgi.ebay.com/NEW-OFNA-Front-S...#ht_1877wt_886

thanks for the link. i put the ball in, and i will give this a test.

Are you familiar with the RC8 16mm shocks? What stiffness of springs would you recommend? Right now i was thinking 25wt oil and the softest i have.

fixed it, went out a hole... running 25wt will see what happens...