Categories


 

Your Cart

Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
 

 Checkout
Aluminum EMaxx Chassis - VMaxx
  (Enlarge)  
Manufacturer RC Monster Products

Aluminum EMaxx Chassis - VMaxx

 

Introducing the RC-Monster "V-Maxx" chassis for the Traxxas Emaxx monster trucks.  As the first offering for our "Victory" series, the goal was to put as much Value and Versatility into the chassis as possible. Looks, durability and compatibility were driving forces for this chassis.

 

In stock and ready for shipment!

 

Main chassis is cnc machined from 1/4" 6061 billet aluminum. The machined plastic battery trays locate the battery packs below the top deck - maximum total ground clearance is achieved, while center of gravity is significantly lower than stock. The battery trays secure to the chassis using 4 M4 screws in each tray - solid setup. This also allows for custom battery tray configurations, such as standing the packs up and moving them in towards the center. The packs are secured using a 20" strap through the tray holding the pack along its length. Several cutouts allow use of the strap to position the pack forward or rearward, as well as take up extra strap length if using smaller packs. The tray pockets are approximately 49mm wide and 176.5mm long, allowing use of a wide variety of packs. 
 
ESC can be located in multiple locations - near the rear like stock, slightly forward of the stock location(closer to tranny), and in the stock rx box location(this may be ideal for center diff installs, for example, or ERevo style motor mounting.). 
 
Nearly identical to the stock chassis weight with all like components installed(battery holders on stock chassis, trays, screws and straps on V-Maxx chassis) - the Cg is very significantly lower, so handling will be notably improved, while retaining high center ground clearance and the legendary Maxx personality - this chassis retains the Monster Truck attitude, while improving durability, handling, looks and pure style!
 
Stock length -  chassis braces included with the chassis.
 
Components are positioned in their stock locations, allowing a direct, trouble free swap. If you have center cvds already, they still work. Servos will drop in directly, along with everything else(2 speed kit excluded presently - if we get enough requests, we should be able to make a 2 speed install kit). The stock body will be a direct fit without modifications.
 
Removable transmission mounts - the separate, bolt-in tranny mounts locate the transmission in its stock location, allowing use of the stock center skid, stock center sliders or center cvds(anything designed for stock chassis will fit). Removal of mounts allows plenty of room for a center diff (up to around 52 tooth depending on placement) - Add our Universal diff/motor mount, Slipperential and V-Maxx center skid for bolt-on performance.
 
Don't forget our Maxx Shock Towers - a perfect complement to this item!
 
This item is not eligible for Flat Rate shipping.
 
Price: $150.00
184.35 CAD | 111.03 GBP | 125.30 EUR
Add to cart
« Previous | Next »
 
1 Product Reviews - Average rating 5 / 5 (Show All)

Click to review this product

I cannot wait!!!

- November 30th 2016

All grins here

Click to review this product

 
 

 

Drag Specialties

Bikers ChoiceTucker Rocky

Tucker Rocky